spec no: dsaf1341 rev no: v.1 date: mar/30/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 120300383 9 package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .1(0.004") unless otherwise noted. 3. specifications are subject to change without notice. 2.0x1.25mm smd chip led lamp features 2.0x1.25mm smt led,0.5mm max.thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. various colors and lens types available. package : 2000pcs / reel. rohs compliant. aphcm2012cgck - f01 green description the green source color devices are made with ingaalp on gaas substrate light emitting diode .
spec no: dsaf1341 rev no: v.1 date: mar/30/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 120300383 9 electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 aphcm2012cgck - f01 green (ingaaip) water clear 10 50 110 symbol parameter device typ. max. test conditions units peak peak wavelength green 574 nm i f =20ma d dominant wavelength green 570 nm i f =20ma ? 1/2 spectral line half - width green 20 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f forward voltage green 2.1 2.5 v i f =20ma i r reverse current green 10 ua v r = 5v parameter green units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaf1341 rev no: v.1 date: mar/30/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 120300383 9 green aphcm2012cgck - f01
spec no: dsaf1341 rev no: v.1 date: mar/30/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 120300383 9 tape specifications (units : mm ) recommended soldering pattern (units : mm ) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. aphcm2012cgck - f01
|